Module 04 · Inventory and Cost Management

How to Conduct a Stock Opname Step by Step

Six steps separate a stock count that's just a chore from one that actually catches theft, spoilage, and data-entry errors before they compound.

6 min readLesson 6 of 13 in this moduleUpdated 2026-08-25

Knowing how to conduct a stock opname properly turns a stock count from a guessing exercise into a check you can actually trust. Rush it — count while sales keep happening, or post an adjustment before you know why the number is off — and the result tells you nothing. Done in the right order, a stock opname takes a few hours for a small shop and shows exactly where your inventory records broke, if they broke at all.

Conducting a stock opname means freezing stock transactions, physically counting every item, recording what you find, comparing it to the book balance, investigating any differences, and posting an adjustment so the records match reality. Doing these steps in order is what makes the result trustworthy.

Key takeaways

  • A stock opname follows a fixed sequence: freeze, count, compare, investigate, adjust — skip a step and the result can't be trusted.
  • Freezing transactions during the count window is what makes the book balance you're comparing against actually meaningful.
  • A variance isn't automatically a mistake to fix quietly — recount first, then look for unrecorded transactions, damage, or misplaced stock before adjusting.
  • Posting the adjustment is the last step, not the first. It should only happen once you understand why the numbers differ, or have genuinely ruled out every other explanation.
  • A small shop can usually finish in a few hours; a multi-location or high-SKU business often needs a full day, or rolling cycle counts instead of one big event.

How to conduct a stock opname: what you need first

Before you touch a single shelf, gather three things: the current book balance for every product and location you're counting (exported or printed, not live on a screen someone might change mid-count), a count sheet or device per counter, and a clear boundary on what's included. If you're new to the term itself, what stock opname means and why it matters is worth reading first.

Decide staffing too. Ideally, someone who doesn't manage day-to-day stock does the counting, or at least reviews the results — a second pair of eyes catches errors the usual stock-keeper might miss. If you're also setting up how sales and purchases enter your stock in the first place, purchase orders and sales orders covers where those book-balance figures come from.

Step 1: Freeze transactions

Stop sales, receiving, and transfers for the count window before you count anything. If the book balance keeps changing while you're counting — a sale rings through, a delivery gets logged — you're comparing your physical count against a moving target, and the comparison stops meaning anything.

For a small shop, this often means counting outside trading hours or closing briefly. For a business that can't close, it means restricting the specific products or sections being counted from any transaction until signed off — count one aisle at a time, freezing only what's currently being counted.

Step 2: Count physically

Count every item once, systematically — one location or section at a time, working through a fixed order so nothing gets skipped or double-counted. Pair a counter with a recorder for anything beyond a handful of SKUs; reading a number aloud and having someone else write it down catches transcription mistakes that counting alone doesn't.

Record the actual quantity you find, not what you expect to find. This sounds obvious, but it's the single most common way a stock opname quietly fails — a counter who "knows" the shelf should have 40 units writes 40 without really counting.

Step 3: Compare the count to your book balance

Once counting is done, line up each physical count against the book balance for that same product and location, and calculate the difference.

Take a hardware supplier, Fairview Hardware & Supply, counting a fast-moving SKU: 1/4-inch hex bolts.

Item Quantity
Book balance 340
Physical count 316
Variance −24

A shortage of 24 units. At this point you know that there's a discrepancy — not yet why.

Step 4: Investigate variances before you adjust

Recount the discrepant item first to rule out a simple counting error. If the second count confirms the gap, look for a cause before you touch the books:

  • Unrecorded transactions — a sale, return, or delivery that happened but was never entered.
  • Damage or expiry never written off — stock that's physically gone or unsellable but still sitting on the books.
  • Misplaced stock — counted in the wrong location, or sitting in a bin nobody checked.
  • Genuine shrinkage — theft or loss with no paper trail at all.

Fairview's team recounts and still finds 316 bolts. Checking recent records, they find a 6-unit return to the supplier that was never entered — that accounts for 6 of the 24. The remaining 18 units have no explanation after checking delivery records and neighboring bins, so that's the number written off as shrinkage. Skipping straight to an adjustment without this step is one of the common inventory and costing mistakes that makes a stock opname worth less than it should be.

Don't treat every variance as a mistake to bury

It's tempting to just post the adjustment and move on, especially when the number is small. But a pattern — always short on the same SKU, always at the same location, always after the same shift — is often more valuable than the individual adjustment. Investigate before you adjust, and keep a note of what you found, even when the cause turns out to be mundane.

Step 5: Post the adjustment

Once you understand the variance — or have genuinely exhausted the likely explanations — post an inventory adjustment to bring the book balance in line with what you counted. This posts to your inventory value and, ultimately, to cost of goods sold, so it isn't a cosmetic fix — it changes your numbers.

For Fairview: 18 bolts at a cost of $3.50 each is a $63.00 write-down, on top of correcting the 6-unit return that should already have been recorded separately. That $3.50 figure comes from whichever costing method — FIFO or average cost — the product uses, so the write-down is only as accurate as that costing setup.

Adjustment Units Value
Unrecorded supplier return (correct separately) 6 —
Genuine shrinkage (write off) 18 $63.00

How long it takes, and how often to run one

A small shop with a few hundred SKUs in one location can usually finish a full stock opname in a few hours. A multi-location retailer or a business with thousands of SKUs often needs a full day, or splits the work into rolling cycle counts instead of one disruptive event. Many businesses run a full count monthly or quarterly and lean on cycle counts for high-value or fast-moving items in between; retail inventory priorities covers how to decide which SKUs deserve that extra attention.

A checklist for your next count
  1. Export or print the book balance for every product and location being counted.
  2. Freeze sales, receiving, and transfers for the count window (or per section, if counting live).
  3. Assign counters — ideally someone other than the usual stock-keeper — and pair with a recorder for larger counts.
  4. Count every item once, systematically, recording what you actually find.
  5. Compare each count to its book balance and list every variance.
  6. Recount discrepant items, then investigate: unrecorded transactions, damage, misplacement, or genuine loss.
  7. Post the adjustment only once you understand the cause, or have ruled out the likely ones.
  8. Note any pattern for next time — the same SKU short twice in a row is a signal worth acting on.
Doing this in Reyuko

Reyuko has a guided version of this whole process built in. Inventory → Inventory Checking shows the book quantity for a product next to a field where you enter what you actually counted, with the difference calculated live as you type — folding step 3 (compare) and the start of step 4 (investigate) into a single screen instead of a spreadsheet reconciliation afterward.

Once you're satisfied with a count and understand what caused any variance, saving it automatically creates the corresponding inventory adjustment and posts it. If you sell from more than one location, Inventory → Locations tracks stock separately per location, so counts and adjustments stay tied to the right place.

Inventory Checking, like the rest of inventory tracking, is in Reyuko's free edition — a guided stock opname doesn't require a paid plan.

Keep going: the module Inventory Accounting and COGS in Practice covers inventory shrinkage and write-down journal entries.

Frequently asked questions

What are the steps in a stock opname or physical inventory count?

The typical sequence is: freeze incoming and outgoing stock transactions, count every item physically, record the counted quantities, compare them against the book balance in your records, investigate any variances, and finally post adjusting entries so the books match what was physically counted.

Why do you need to freeze transactions before a stock count?

If sales or deliveries keep happening while stock is being counted, the book balance keeps changing after the count started, making the comparison meaningless. Freezing transactions — pausing sales, receiving, and transfers for the count window — ensures the book figure being compared is a fixed, accurate snapshot.

What do you do when physical count doesn't match book stock?

Recount the discrepant items first to rule out counting error, then check for unrecorded transactions, damaged or expired stock that was never written off, and misplaced items in other locations. Only once a real cause can't be found should the variance be posted as a stock adjustment.

Who should be involved in a stock opname?

Ideally, someone other than the person who normally manages day-to-day stock does the counting, or at least reviews the results, to reduce the chance of errors or discrepancies going unnoticed. For larger counts, pairing a counter with a recorder reduces transcription mistakes.

How long does a stock opname usually take?

It depends heavily on how many SKUs and locations are involved — a small shop with a few hundred items might finish in a few hours, while a multi-location retailer or manufacturer can take a full day or more. Cycle counting smaller sections regularly reduces how disruptive a full count needs to be.

How is a stock opname different from a cycle count?

A stock opname is typically a full, scheduled count of every item at once, while a cycle count checks a smaller subset — a category, a location, or the highest-value SKUs — on a rolling basis. Many businesses run occasional full opnames and rely on frequent cycle counts to catch problems in between.

Do you need special software to conduct a stock opname?

No — a spreadsheet or paper count sheet works for a small product range. Software helps mainly by keeping the book balance accurate and current at the moment you start counting, and by turning the comparison and adjustment steps into one action instead of several manual ones.

Run a guided stock opname in Reyuko

Reyuko's Inventory Checking screen shows book quantity next to your count in real time and posts the adjustment for you when you save — free in every plan.

Download Reyuko freeSee what's included