Module 03 · Fraud Patterns and System-Enforced Controls

Common Fraud Patterns: Skimming, Lapping, and Inventory Leakage

Money taken before it is recorded leaves no shortfall to find. These three patterns all work that way — and all break on the same handful of routines.

6 min readLesson 2 of 5 in this moduleUpdated 2026-09-22

Key takeaways

  • Skimming removes cash before it is recorded, so the books balance perfectly and only physical checks or margin analysis reveal it.
  • Lapping hides a taken payment by covering it with the next customer's payment, which is why it always grows.
  • Customer statements and receivable confirmations must be sent by someone outside sales and collections.
  • Write-offs of receivables and stock are the exit route for both patterns — require a second signature on every one.
  • Inventory leakage shows as a gap between recorded stock and counted stock; regular counts of high-value lines find it early.
  • Gross margin that drifts down while prices and suppliers are unchanged is one of the earliest signals of any of the three.

The three patterns in this lesson share one feature that makes them hard to find: the money is taken before or instead of being recorded. There is no shortfall between the books and the bank, because the books never knew about the transaction. Reconciliation — the workhorse of most financial controls — cannot see any of them.

What does see them is a small set of routines: independent customer contact, physical counts, two signatures on write-offs, and watching gross margin over time. Knowing the shape of each pattern is what makes those routines efficient, because you are looking for something specific instead of reading everything.

Skimming: cash taken before the record exists

Skimming is an unrecorded sale, or a customer payment received and never entered. A cash sale rung up as a no-sale, a payment taken in person and pocketed, a service done off the books using the business's materials.

Because the transaction never entered the system, these do not help:

  • Bank reconciliation — the books match the bank, because neither knows about the sale.
  • Till counts — the drawer balances against what was recorded, and the sale was not recorded.

What does help:

  • Physical controls at the point of sale. Every sale rung up, a customer receipt for every transaction, and the refund and void review that closes the alternative route.
  • Gross margin trend. Sales taken out of the record leave the cost of goods in it, so margin slips even though nothing about pricing changed.
  • Stock to sales ratio. Goods sold without a sale record still leave the shelf. Over a month this shows as stock consumed faster than recorded sales explain.

Lapping: yesterday's hole covered with today's payment

Lapping applies to businesses that invoice customers. A payment from customer A is taken. When A's account looks overdue, the payment later received from customer B is posted to A. Then C covers B, and so on.

Two consequences follow, and both help you find it:

  1. It never stops. The scheme requires continuous covering activity, so it grows and becomes more fragile over time — which is why it is usually discovered during a holiday or sick leave.
  2. Posting dates drift. Payments are consistently posted later than they were received, because each one is waiting to be applied to the previous gap.

The detection routines:

  • Send statements from outside collections. If the person who handles payments also sends the statements, they can intercept the one that would reveal the problem. Statements should come from finance or the owner.
  • Confirm balances directly with customers occasionally — a short "our records show this balance, please confirm" to a sample of accounts, sent from an address the collections person does not control.
  • Compare received dates to posted dates on customer payments; a consistent lag on one person's accounts is worth asking about.
  • Enforce holidays. A scheme that needs daily maintenance rarely survives two uninterrupted weeks.
Both patterns exit through a write-off

Skimming and lapping end the same way: a receivable is written off as bad debt, or a stock difference is adjusted away. That is the moment a loss becomes invisible — which is why a write-off should always need a second signature from someone who did not handle the money or the goods.

Inventory leakage: goods that leave without paperwork

Leakage is stock that goes out with no record — taken by staff, given away, damaged and quietly disposed of, or delivered without a despatch note and never invoiced. Most of it is not theft; most of it is an undocumented process that has become normal.

It shows up in three ways:

SignalWhat it looks like
Count variancePhysical count is lower than recorded stock, repeatedly, on the same lines
Margin driftGross margin declines with no change in selling prices or supplier costs
Consumption mismatchMaterials used exceed what the recorded output required

The routines are unglamorous: count high-value and portable lines more often than everything else; require a document for every movement including samples, staff purchases and write-offs; investigate variances above a stated threshold rather than adjusting them straight out; and restrict who can post stock adjustments to someone who does not do the counting.

Adjusting a variance is not explaining it

The quickest way to make a count difference disappear is to post an adjustment. Do that without investigation and the ledger becomes tidy while the cause continues. Set a threshold above which a variance must be explained in writing before the adjustment is approved.

The early signal for all three

Gross margin by product line, tracked month to month, is the most useful single number here. Skimming removes revenue while costs stay. Leakage adds cost while revenue stays. Both push margin in the same direction, and both usually do so gradually.

You are not looking for one bad month — mix changes, promotions and one-off buying all move margin around. You are looking for a sustained drift on a line where nothing in your pricing or supply changed. That is the point at which a count and a look at the process are worth a morning.

Doing this in Reyuko

Reyuko posts cost of goods sold at the same time as the sale, consuming stock from your costing method — average, FIFO, LIFO or first-expiry-first-out — so margin is calculated from actual recorded movements rather than a period-end estimate. That is what makes month-to-month margin comparison usable as an early signal: the cost side updates with each transaction rather than at year-end.

Stock adjustments and physical counts are recorded as their own documents in the ledger, so a count variance leaves a trace that can be reviewed later instead of silently changing a balance. Who can post those adjustments is set through the preset roles — the Warehouse role's access differs from Accountant, so counting and adjusting can be kept apart.

Detection routines worth the time
  1. Send customer statements and balance confirmations from outside sales and collections.
  2. Require a second signature on every receivable write-off and every stock adjustment above your threshold.
  3. Count high-value and portable stock lines monthly, not annually.
  4. Track gross margin by line month to month and investigate sustained drift.
  5. Make holidays mandatory for anyone handling customer payments, and have someone else cover the role.

Knowing the patterns tells you what to look for. The next lesson turns that into a schedule — daily and weekly audit routines.

Frequently asked questions

What is skimming in accounting fraud?

Skimming is taking cash before it enters the records — an unrecorded sale, a payment received and never entered. Because the transaction never existed on paper, the ledger still balances and a bank reconciliation will not reveal it. Detection comes from physical controls, margin analysis, and customer complaints about unrecorded payments.

What is lapping and how do you detect it?

Lapping means covering a stolen customer payment with money received later from a different customer, then covering that gap with the next one. It is detected by comparing the date payments were received with the date they were posted, by sending statements from outside the collections function, and by watching for one person who insists on handling a particular customer's account.

Why should customer statements be sent by someone outside sales?

Because the person who took a payment can otherwise intercept the statement that would reveal it. Sending statements and receivable confirmations from finance — or from the owner — creates a communication channel the person handling the cash does not control, which is the single most effective detection routine for lapping.

How do we detect inventory leakage?

Count physical stock and compare it to recorded stock, most often for your highest-value and most portable lines. Look also at gross margin by product: leakage raises cost of goods sold relative to revenue, so margin drifts down even though prices and supplier costs have not changed.

Why do write-offs need two signatures?

Because a write-off is the exit route for both skimming and lapping — it makes a missing receivable or missing stock disappear from the records legitimately. Requiring a second, independent signature means the person who could have caused the loss cannot also be the person who erases it.

Margins and stock that stay comparable

Reyuko posts cost of goods sold with each sale and keeps stock movements in the ledger, so margin drift shows up in a report instead of at year-end.

Download Reyuko freeSee what's included