Module 04 · Profit & Profitability

Break-Even Analysis: How Much Do You Need to Sell to Stop Losing Money?

Break even analysis before opening a business: divide monthly fixed costs by contribution margin per unit to find the sales you need each month.

6 min readLesson 7 of 14 in this moduleUpdated 2026-08-25

Break-even point is the exact level of sales at which revenue equals total costs — no profit, no loss. Below it, every sale still leaves you short for the month. Above it, every additional sale is pure profit, because your fixed costs are already covered. The formula is short: break-even units = fixed costs ÷ contribution margin per unit — but the two ideas behind it, fixed costs and contribution margin, are worth understanding properly before you trust the number.

Key takeaways

  • Break-even point (units) = Fixed Costs ÷ (Selling Price − Variable Cost per Unit).
  • The denominator — price minus variable cost — is called the contribution margin per unit.
  • Break-even point in dollars = Fixed Costs ÷ Contribution Margin Ratio, useful when counting individual units isn't practical.
  • Only the interest portion of a loan payment counts as a fixed cost; the principal repayment reduces cash, not profit.
  • Margin of safety tells you how far actual sales can fall before you cross back below break-even.
  • Raising your price lowers your break-even point; raising your variable cost per unit raises it.

The three cost types break-even depends on

Break-even analysis starts by splitting every cost into how it behaves as sales volume changes, not by what the cost is called.

Cost type Behavior Everyday examples
Fixed costs Same total each month regardless of sales volume Rent, salaried staff wages, depreciation, loan interest
Variable costs Rise and fall directly with units sold Raw materials, packaging, shipping, sales commissions
Semi-variable costs Part fixed, part variable Electricity (a base charge plus usage), overtime pay

Semi-variable costs need to be split into their fixed and variable pieces before you run the calculation — lump them into "fixed" wholesale and your break-even point will be overstated; lump them into "variable" and it will understate how much volume you actually need.

Loan principal is not a fixed cost

Only the interest portion of a loan repayment belongs in fixed costs. The principal repayment reduces your cash balance, but it never appears on the income statement as an expense — so including it in break-even math overstates the sales you need and can make a perfectly viable business look like it isn't covering its costs.

Contribution margin: the number that does the real work

Contribution margin is what's left from a single sale after its own variable cost is paid — the amount that sale "contributes" toward covering fixed costs, before any profit begins.

Contribution Margin = Selling Price − Variable Cost per Unit

Contribution margin per unit

Once total contribution margin for the period equals total fixed costs, you've broken even. Every unit sold after that point keeps its full contribution margin as profit, because fixed costs are already covered — which is exactly why profit tends to accelerate once a seasonal or growing business clears its break-even line. That fixed/variable split is a different cut from the four layers of profit on an income statement, which group costs by category rather than by how they move with volume — a business can be fully split for break-even purposes and still report COGS, operating expenses and net profit the usual way.

The break-even formulas

Break-even point (units) = Fixed Costs ÷ (Selling Price per Unit − Variable Cost per Unit). The result — price minus variable cost — is called contribution margin per unit. Example: $4,000 in fixed costs ÷ $20 contribution margin per unit means 200 units must be sold before the business stops losing money. That's the unit version. There's a dollar version too, for businesses where "units" doesn't mean much — most service businesses, for instance, don't sell in discrete units at a single price.

BEP (units) = Fixed Costs ÷ (Price − Variable Cost per Unit)

Break-even point (units)

BEP ($) = Fixed Costs ÷ Contribution Margin Ratio

where Contribution Margin Ratio = Contribution Margin per Unit ÷ Price

Break-even point (revenue)

The dollar version is the unit version multiplied through by price — same answer, expressed as a revenue target instead of a unit count.

A full worked example: Sunrise Kitchen's break-even point

Sunrise Kitchen sells an average of 3,600 servings a month at $25 each. Ingredients cost $10 per serving. Monthly fixed costs are $40,000 in operating expenses (rent, wages, utilities, and the owner's own $10,000 salary, booked as a real cost rather than an unrecorded draw) plus $1,000 of loan interest.

Component Value
Selling price per serving $25.00
Variable cost per serving (ingredients) $10.00
Contribution margin per serving $15.00 (60% ratio)
Fixed costs per month (opex $40,000 + interest $1,000) $41,000
Break-even (units) = $41,000 ÷ $15.00 2,733.3 → 2,734 servings/month
Break-even (dollars) = $41,000 ÷ 0.60 $68,333.33/month

Sunrise Kitchen actually sells 3,600 servings a month — 866.7 servings above its break-even point. Multiply that surplus by the $15 contribution margin per serving: 866.7 × $15 = $13,000. That figure isn't a coincidence — it's precisely the net profit the business reports for the month. Break-even analysis and the income statement are two views of the exact same arithmetic.

Margin of safety: how much room you actually have

Margin of safety measures the cushion between where you are and where you'd start losing money.

Margin of Safety = (Actual Sales − Break-Even Sales) ÷ Actual Sales

Margin of safety

For Sunrise Kitchen: (3,600 − 2,733.3) ÷ 3,600 = 24%. Sales could fall by roughly a quarter before the business crosses back into a loss — a useful number to sit alongside net margin when deciding how much risk a slow month, a new competitor, or a rent increase actually represents.

How price and cost changes move your break-even point

Break-even point isn't fixed once calculated — it moves whenever price, variable cost, or fixed cost changes, and the direction of the move is predictable:

  • Raise your price → contribution margin per unit rises → fewer units needed to break even.
  • Raise variable cost per unit (a supplier price increase, for instance) → contribution margin shrinks → more units needed.
  • Raise fixed costs (a rent increase, a new salaried hire) → more total contribution margin needed → more units needed, at the same price and variable cost.

This is also why a 5% price increase, run through the same formula, is one of the fastest ways to see whether it's worth the risk of losing some customers: fewer units are then needed to cover the same fixed costs, so a modest amount of volume loss can still leave you better off overall.

Doing this in Reyuko

Break-even analysis works from your own fixed and variable costs, which means the inputs are only as good as your bookkeeping. Reyuko's Chart of Accounts groups expenses under Operating and Non-Operating categories from the start, so separating a genuinely fixed cost (rent, a salaried wage) from a variable one (materials, commission) doesn't require re-sorting a spreadsheet by hand.

The Budget module then lets you set a monthly target per account — including fixed costs like rent and interest — and compares it against actual ledger activity with a live variance in dollars and percent. That's not a break-even calculator by itself, but it's the same underlying fixed-cost figures the formula needs, already organized by account and updated as you post transactions, rather than recreated from scratch every month. The Chart of Accounts and core reporting behind this are part of the free edition; Budget itself is one of the features included from Reyuko's paid tiers upward.

Calculate your own break-even point

  1. List every cost from last month and mark each fixed, variable, or semi-variable — split the semi-variable ones.
  2. Add up the fixed costs, interest included, loan principal excluded.
  3. Subtract variable cost per unit from selling price to get contribution margin.
  4. Divide fixed costs by contribution margin per unit.

For a complete version of this calculation run against a real food business, see the full worked break-even example. If you're setting the price itself, check whether you're pricing by markup or by margin first — the two produce different contribution margins from the same numbers.

Show the check: $4,000 fixed costs, $50 price, $30 variable cost

Contribution margin per unit = $50 − $30 = $20. Break-even units = $4,000 ÷ $20 = 200 units. Break-even revenue = 200 × $50 = $10,000, which also equals $4,000 ÷ (20 ÷ 50) = $4,000 ÷ 0.40 = $10,000.

Frequently asked questions

How many sales do I need to break even each month?

Divide your monthly fixed costs by the contribution margin per unit, which is the selling price minus the variable cost per unit. If fixed costs are 4,000 a month and each unit leaves 20 after its variable cost, you need 200 units a month before the business stops losing money.

What costs count as fixed and which as variable?

Fixed costs stay the same in total whatever you sell, such as rent, salaried wages, depreciation and loan interest. Variable costs rise with each unit sold, such as raw materials, packaging, shipping and sales commissions. Semi-variable costs, like electricity with a base charge plus usage, must be split into their fixed and variable parts first.

Can break-even be expressed as revenue instead of units?

Yes. Divide fixed costs by the contribution margin ratio, which is contribution margin per unit divided by price, to get break-even revenue in dollars. In units, you divide fixed costs by price minus variable cost per unit. With fixed costs of 4,000, a price of 50 and a variable cost of 30, the answer is 200 units or 10,000 in revenue.

Is a loan payment a fixed cost?

Only the interest part is. Interest is an expense and belongs in fixed costs for break-even. The principal repayment reduces cash but never appears as an expense, so leaving it in overstates the sales you need. If a monthly loan payment is 3,000 and 1,000 of it is interest, only the 1,000 goes into fixed costs.

How much room do I have above my break-even sales?

That room is the margin of safety: actual sales minus break-even sales, divided by actual sales. With fixed costs of 41,000, a price of 25 and a variable cost of 10, break-even is about 2,733 servings. At 3,600 servings sold, (3,600 - 2,733) / 3,600 gives a margin of safety of about 24 percent, so sales could fall that far before a loss.

Can Reyuko's Budget help track the fixed costs for this calculation?

Reyuko's Budget module sets a monthly target per account, including fixed costs like rent and interest, and compares it with actual ledger activity in dollars and percent. It is not a break-even calculator by itself, but it keeps the fixed-cost figures organized by account instead of rebuilt each month.

Know your break-even before you commit

Reyuko's Budget module compares your actual revenue and expenses against a plan by account and period, so you can see how close you're running to your break-even point each month.

Download Reyuko freeSee what's included