Module 04 · Profit & Profitability

Markup vs Margin: The Pricing Mistake That Eats Your Profit

A 30 percent margin needs a 42.9 percent markup, not 30. Divide cost by 0.70 to set the price, so a $100 cost sells at $142.86 and keeps $42.86 profit.

6 min readLesson 6 of 14 in this moduleUpdated 2026-08-25

Markup vs margin: a 50% markup on a $100 cost gives you a $150 selling price — but the $50 profit in that price is only 33% of $150, a 33% margin, not 50%. Both numbers describe the same $50 of profit. They just divide it by different things: markup divides by what you paid, margin divides by what the customer paid. Confuse the two when you price, and you will systematically undercharge without ever noticing why.

Key takeaways

  • Markup = profit ÷ cost. Margin = profit ÷ selling price. Same profit dollar, different denominator.
  • A given markup percentage always converts to a smaller margin percentage — the gap grows as the percentage gets bigger.
  • Setting a price with "cost plus 30%" and calling it a "30% margin" is one of the single most common pricing errors in small business.
  • To reach a target margin, divide cost by (1 − margin), not multiply by (1 + margin).
  • The confusion compounds: at low percentages the gap is small money, but at higher percentages it can be the difference between a healthy business and a struggling one.

Markup and margin, defined side by side

Both start from the same profit figure — selling price minus cost. Where they diverge is the base each one measures against.

Markup % = (Selling Price − Cost) ÷ Cost × 100

Markup answers: "How much did I add on top of what I paid?"

Markup

Margin % = (Selling Price − Cost) ÷ Selling Price × 100

Margin answers: "What share of the final sale price is actual profit?"

Margin

Selling price is always the bigger number in that pair — it already includes the cost plus the profit. Divide the same profit dollar by a bigger denominator, and you always get a smaller percentage. That's the entire mechanism behind the confusion, and it never reverses: margin will always be lower than markup at any percentage above zero.

Working the same sale two ways

Take a product that costs $100. Price it with a 30% markup:

Step Calculation Result
Selling price $100 × (1 + 30%) $130
Profit $130 − $100 $30
Actual margin on that price $30 ÷ $130 23.1%

You added 30% at the register, but only 23.1% of the final price is profit — because the base you divided by (the $130 price) is bigger than the base you multiplied from (the $100 cost). If your real target was a 30% margin, you needed a different starting calculation entirely:

Step Calculation Result
Selling price for a true 30% margin $100 ÷ (1 − 30%) $142.86
Profit $142.86 − $100 $42.86
Equivalent markup $42.86 ÷ $100 42.9%

Markup is profit divided by cost; margin is profit divided by selling price. On a $100 cost sold for $150, profit is $50 — a 50% markup but only a 33% margin, since $50 ÷ $150 = 33%. Businesses that price using markup percentages when they meant margin routinely undercharge and erode their real profit. Here, the pattern is the same at a lower percentage: pricing at a 30% markup instead of a genuine 30% margin leaves $42.86 − $30.00 = $12.86 less profit on every single unit sold — 30% less profit than you thought you'd priced in, on every sale, for as long as the mistake goes uncorrected.

Converting between the two

You rarely need both numbers from scratch — usually you know one and need the other. Two formulas cover every case:

Margin = Markup ÷ (1 + Markup)

A 30% markup (0.30) converts to 0.30 ÷ 1.30 = 23.1% margin.

Convert markup to margin

Markup = Margin ÷ (1 − Margin)

A 30% margin (0.30) converts to 0.30 ÷ 0.70 = 42.9% markup.

Convert margin to markup

A quick reference table for the percentages small businesses use most often:

Markup Equivalent margin Margin Equivalent markup
20% 16.7% 20% 25.0%
30% 23.1% 30% 42.9%
50% 33.3% 50% 100.0%
100% 50.0% 60% 150.0%

At 100% markup ("double the cost"), margin is only 50% — a gap so wide it surprises most owners the first time they see it worked out.

Why this mistake is so common — and so expensive

Most small businesses price by markup because it's the intuitive way to think about buying and reselling: "I paid $100, I'll add 30%." Financial statements, however, including your income statement, always report profitability as margin — profit as a percentage of revenue, never as a percentage of cost. That mismatch means a business owner can be consistently pricing to a lower real margin than they believe, discovering it only when they compare their own numbers against typical margins for their industry and can't explain the gap.

A flat markup rule ignores how cost of goods sold actually behaves

Applying the same markup percentage across every product treats all costs as equally solid, but supplier prices move, spoilage varies, and shipping costs shift. A markup that produced a decent margin last quarter can silently erode as underlying costs creep up — check margin directly on your actual numbers periodically, rather than trusting a fixed markup rule to hold indefinitely.

A worked example: pricing a batch of 200 units

Suppose you buy 200 units at $8 each — $1,600 total cost — and want a genuine 40% margin, not a 40% markup.

Reference: cost basis for 200 units purchased at $8 each
Account Debit Credit
Inventory 1,600
Cash 1,600

Selling price per unit = $8 ÷ (1 − 0.40) = $13.33. Sell all 200 units and revenue is 200 × $13.33 = $2,666.67. Profit is $2,666.67 − $1,600 = $1,066.67, and $1,066.67 ÷ $2,666.67 = 40% — the margin you actually wanted. Price the same units at a 40% markup instead ($8 × 1.40 = $11.20), and total revenue drops to $2,240, with profit of only $640 — a real margin of 28.6%, not 40%. On 200 units, that single mix-up costs $426.67 in profit that a spreadsheet would have caught in seconds. It also quietly raises how many units you need to sell before you cover your costs — see how break-even point moves when the price behind it changes.

Doing this in Reyuko

Reyuko's Product record stores a purchase/cost price and a selling price as two separate fields for every item in your catalog, with the product's cost tracked by your chosen method — Average, FIFO, or LIFO — rather than a single static number.

Because both figures live on the same record, you can set a selling price to hit a target margin directly, rather than eyeballing a markup percentage and hoping it converts to what you actually meant. When you record a sale, the Income Statement report calculates gross margin from the real cost and real selling price on every transaction — so a markup-vs-margin mix-up shows up as a lower reported margin instead of staying hidden in a spreadsheet formula. This is part of Reyuko's free edition, with no separate pricing add-on required.

Check your own pricing in 30 seconds

Pick your three best-selling items and work out the real margin behind each one:

  1. Margin = (Selling price − Cost) ÷ Selling price
  2. Compare it to the margin you believe you're pricing for
  3. If they don't match, you're pricing by markup and calling it margin
Show the check for a $60 item that cost $40

Profit is $60 − $40 = $20. Margin is $20 ÷ $60 = 33.3%. Markup, using the same numbers, is $20 ÷ $40 = 50%. Same sale, two different percentages — 50% markup, 33.3% margin.

Frequently asked questions

What markup gives a 30 percent margin?

A 30 percent margin needs a 42.9 percent markup. Divide the margin by one minus the margin: 0.30 divided by 0.70 gives 0.429. On a $100 cost, the price is $142.86, which leaves $42.86 of profit. Check it: $42.86 divided by $142.86 is 30 percent, so the margin holds.

How do I convert margin to markup?

Use markup = margin divided by (1 minus margin), with percentages written as decimals. A 40 percent margin is 0.40 divided by 0.60, which is a 66.7 percent markup. To go the other way, use margin = markup divided by (1 plus markup). A 30 percent markup gives 0.30 divided by 1.30, or a 23.1 percent margin.

Why can't I just multiply cost by 1.3 for a 30 percent margin?

Because 1.3 builds in a 30 percent markup, and markup is measured on cost, not on price. Multiplying a $100 cost by 1.3 gives $130, a $30 profit that is only 23.1 percent of the selling price. For a true 30 percent margin, divide the cost by 0.70 instead, which gives $142.86.

Why is margin always lower than markup at the same percentage?

Both use the same profit dollars, but markup divides by cost and margin divides by the selling price, which is always the larger number. A bigger divisor gives a smaller percentage, so the gap grows as the figure rises. At a 100 percent markup the margin is only 50 percent, and at 0 percent the two are equal.

Where does a Reyuko product record keep cost and selling price?

A Reyuko product record stores cost and selling price as two separate fields, with cost tracked by Average, FIFO or LIFO. The Income Statement calculates gross margin from the real cost and selling price on every transaction, so a markup mistake shows up as a lower margin instead of staying hidden. This is part of the free edition.

What is the difference between markup and margin?

Markup is profit divided by cost; margin is profit divided by selling price. On a $100 cost sold for $150, the profit is $50, which is a 50% markup ($50 ÷ $100) but only a 33.3% margin ($50 ÷ $150). Because the selling price is always larger than the cost, margin is always lower than markup at the same profit.

Price by margin, not by guesswork

Reyuko lets you set a product's cost and selling price directly, so margin is calculated from real numbers, not a rule of thumb at the till.

Download Reyuko freeSee what's included