Module 04 · Inventory and Cost Management

Bill of Materials and Manufacturing Costing for Small Producers

Most small producers price by feel — a bill of materials replaces the feel with a number you can actually defend.

5 min readLesson 8 of 13 in this moduleUpdated 2026-08-25

Bill of materials costing is how a small producer turns "I think this costs about $8 to make" into an actual number. A bill of materials (BOM) lists every raw material and component, with exact quantities, needed to make one unit of a finished product — and once you multiply that list by real prices and add labor, you have a manufacturing cost you can price against with confidence instead of a guess.

A bill of materials lists every raw material and component, with quantities, needed to make one unit of a finished product. Multiplying each component's quantity by its cost, then adding direct labor and overhead, gives the true manufacturing cost per unit — the number small producers need in order to price products accurately.

Key takeaways

  • A bill of materials (BOM) is a list of every component and its quantity needed to make one unit of a finished product.
  • Manufacturing cost = materials (from the BOM) + direct labor + overhead. Materials alone routinely understate true product cost.
  • A BOM doesn't require production software to start — a spreadsheet per product is enough for most small producers.
  • Leaving out labor or overhead is the single most common way small producers underprice what they make.
  • Once you have an accurate manufacturing cost per unit, it feeds directly into cost of goods sold and pricing decisions.

What a bill of materials is, and how bill of materials costing works

A bill of materials is exactly what it sounds like: a structured list. For one unit of a finished product, it names every raw material or purchased component that goes into it, and how much of each is needed. A furniture maker's BOM for one chair might list lumber by the board-foot, screws by the count, and fabric by the yard. A candle maker's BOM lists wax by weight, a wick, a jar, and fragrance oil by volume.

The term "recipe" describes the same idea in food production — same function, different name, identical logic underneath. Portion costing in food and beverage businesses is essentially a BOM by another name.

Building a simple bill of materials

You don't need production software to start. List every component that physically goes into one unit, the exact quantity of each, and the current cost of that quantity. Lindenwood Candle Co. makes a single soy candle in a glass jar. Here's its BOM.

Component Quantity Unit cost Line cost
Soy wax 0.25 kg $6.00/kg $1.50
Wick 1 $0.30 $0.30
Glass jar 1 $1.80 $1.80
Fragrance oil 20 ml $0.15/ml $3.00
Label 1 $0.20 $0.20

Total materials cost per candle: $6.80.

That's every physical component, but it's not yet the full cost of making the candle.

From materials to full manufacturing cost

Materials are only one part of what it costs to produce a unit. Two more elements belong in the calculation:

  • Direct labor — the time actually spent making the item, valued at a real labor rate. Even a one-person operation should count owner time; it isn't free just because no paycheck changes hands for it.
  • Overhead — a fair share of the costs that support production but aren't tied to any single unit: workspace rent, equipment, utilities. Allocated per unit, usually based on production volume.
Materials-only costing is the most common small-producer pricing mistake

A BOM that stops at materials looks precise — it has real numbers and decimal places — which is exactly why it's dangerous. It's missing labor and overhead entirely, and a product priced against materials alone is almost always underpriced once the maker's own time is honestly accounted for.

A worked example: full cost of one candle

Continuing with Lindenwood Candle Co.: each candle takes 12 minutes of hands-on labor, and the owner values that time at $18 an hour. Workspace and equipment overhead is allocated at $1.00 per candle, based on typical monthly production volume.

Cost element Calculation Amount
Materials (from BOM) — $6.80
Direct labor 12 min ÷ 60 × $18.00/hr $3.60
Overhead allocation — $1.00
Total manufacturing cost $11.40

If Lindenwood sells this candle for $24.00, gross margin is ($24.00 − $11.40) ÷ $24.00 = 52.5%. Without labor and overhead in the calculation, the same $24.00 price against materials alone would show a misleadingly high 71.7% margin — a number that would quietly justify underpricing, discounting too generously, or expanding a product line that's actually thinner than it looks.

If wax or fragrance oil is bought in batches at different prices over time, the "current cost" line in the BOM should come from the same costing method — FIFO or average cost — used for the rest of your raw materials, so the BOM stays consistent with the rest of your inventory records rather than using a price pulled from memory.

Where the BOM connects to COGS and pricing

Once you know the manufacturing cost per unit, it becomes the "purchase price" in your cost of goods sold formula — instead of a supplier invoice, it's what you calculated from the BOM. Every candle Lindenwood sells carries that $11.40 into COGS, the same way a wholesaler's COGS is built from what it paid a supplier. Keep the BOM updated when a component price moves — a wax supplier's price increase changes the true cost of every candle made after that point, even if you haven't updated your selling price yet. The terms used throughout this article — BOM, overhead allocation, manufacturing cost — are also defined in the inventory and costing glossary, if you want a quick reference while you build your own.

Doing this in Reyuko

Reyuko's Production module, under Inventory, is built around exactly this idea: you define which component products go into a finished product, and running a production document consumes those components from inventory and creates the finished good, carrying their input value into the finished product's cost. The system won't let you finalize a production document unless the total input value equals the total output value — a miskeyed quantity or a forgotten component shows up immediately as an imbalance, rather than quietly understating your cost later. An intermediate Work in Progress account holds that value while a production document sits as a draft, before it's finalized.

Production is an inventory feature, so it handles the materials side — labor and overhead still need to be worked into the finished product's cost the way this article describes. Production, like the rest of inventory tracking, is in Reyuko's free edition.

Try it: cost your own product
  1. List every component that physically goes into one unit, with exact quantities.
  2. Price each line at current cost, and total them — that's your materials cost.
  3. Estimate the time one unit genuinely takes to make, and multiply by a real labor rate.
  4. Add a per-unit share of workspace, equipment, and other production overhead.
  5. Add all three together for your true manufacturing cost per unit.
  6. Compare it to your current selling price. Is your actual margin what you thought it was?

Frequently asked questions

What is a bill of materials used for?

A bill of materials (BOM) lists every raw material, component, and quantity needed to make one unit of a finished product. It's used to plan purchasing, track material usage, and — critically for costing — calculate exactly what it costs to produce each unit, once labor and overhead are added.

How do you calculate product cost from a bill of materials?

Multiply the quantity of each component in the BOM by its current cost, sum those material costs, then add direct labor time multiplied by labor rate, plus any allocated overhead. The total gives the full manufacturing cost per unit, which feeds into pricing and COGS calculations.

What is the difference between a bill of materials and a recipe?

They serve the same function — listing ingredients or components and quantities needed for one unit of output — but recipe is the term typically used in food production, while bill of materials is used in manufacturing and craft production more broadly. The costing logic behind both is identical.

What is included in manufacturing cost besides materials?

Beyond raw materials from the bill of materials, manufacturing cost includes direct labor (the time spent actually producing the item) and overhead, such as a share of equipment, utilities, or workspace costs attributable to production. Leaving out labor and overhead is a common way small producers underprice their products.

Do small producers really need a formal bill of materials?

Even an informal one helps enormously — without listing exact components and quantities, it's easy to guess at product cost and underprice. A BOM doesn't need specialized software to start; a simple spreadsheet per product is often enough for a small producer to price accurately.

How often should a bill of materials be updated?

Update it whenever a component price changes meaningfully, or the recipe or design itself changes. A BOM priced against last year's material costs quietly understates true product cost, the same way stale numbers distort any other part of the books.

Cost every batch the moment you make it

Reyuko's Production module consumes your components into a finished good and won't finalize unless the input and output values actually match — free in every plan.

Download Reyuko freeSee what's included