Module 02 · Basic Bookkeeping Skills

Debits and Credits Explained Without the Confusion

Debits increase assets and expenses; credits increase liabilities, equity and revenue. See each account type's rule, normal balances and worked entries.

7 min readLesson 5 of 14 in this moduleUpdated 2026-08-25

Debits increase assets and expenses; credits increase liabilities, equity and revenue. Every transaction needs equal debits and credits. For example, borrowing $5,000 from a bank debits Cash $5,000 and credits Loan payable $5,000, so the liability goes up with a credit.

Debit doesn't mean money coming in. Credit doesn't mean money going out. Those words describe a side of an entry, left or right, and nothing else — what that side does to a balance depends entirely on which of the five account types you're touching. Get that one idea straight and debits and credits stop being a memorization exercise.

Key takeaways

  • A debit is the left side of an entry, a credit is the right side — neither one means "increase" or "decrease" on its own.
  • Assets and expenses increase with a debit and decrease with a credit. Liabilities, equity, and revenue do the exact opposite.
  • Every transaction needs at least one debit and one credit of equal value — that's what "double entry" means.
  • A transaction can touch three, four, or more accounts at once (a compound entry), as long as the two sides still match.
  • The rule isn't arbitrary — it comes straight out of the accounting equation, Assets = Liabilities + Equity.

Why debit and credit aren't "good" and "bad"

Outside accounting, "credit" sounds positive and "debit" sounds like a deduction — your bank statement reinforces that, since a "debit" there means money left your account. Bring that instinct into bookkeeping and you'll misfire on the very first entry, because a bookkeeping debit or credit is just a position in a ledger — a column, not a verdict.

Here's the featured-snippet version, in one paragraph: debits and credits are the two sides of every accounting entry. Debits increase asset and expense accounts and decrease liability, equity and revenue accounts; credits do the reverse. Every transaction needs equal debit and credit amounts, which keeps assets equal to liabilities plus equity at all times.

That last clause is the whole reason the rule exists. It isn't a convention someone picked at random — it falls directly out of the accounting equation: Assets = Liabilities + Equity. Assets sit on the left of that equation, so a debit — the left-side entry — is what grows them. Liabilities and equity sit on the right, so a credit is what grows those instead. Revenue and expenses are just equity in disguise (revenue increases equity, expenses reduce it), which is why they inherited the same debit/credit behavior as the side of the equation they belong to.

The rule for each account type

There are five account types, and they split cleanly into two groups.

Account type Debit does this Credit does this Normal balance
Assets Increase Decrease Debit
Expenses Increase Decrease Debit
Liabilities Decrease Increase Credit
Equity Decrease Increase Credit
Revenue Decrease Increase Credit

"Normal balance" means the side an account is expected to sit on if nothing has gone wrong. Cash, a debit-normal asset, should show a debit (positive) balance — if it ever shows a credit balance, something is broken, because it would mean the business paid out more cash than it ever had. A supplier account, credit-normal, should show a credit balance representing what you owe; if it flips to a debit balance, you've likely overpaid that supplier.

One account breaks the pattern on purpose: owner's drawings. Drawings sit under equity but carry a debit-normal balance, because taking money out of the business reduces the owner's claim on it — the mirror image of the rest of the equity group, since it represents equity leaving rather than growing.

Debits increase assets and expenses. That's the whole rule.

If you remember only one line, remember that one. Everything else is its logical opposite: liabilities, equity, and revenue increase with credits instead.

Double entry: why there are always two sides

Every recorded transaction hits at least two accounts, one debited and one credited, for the identical amount. This is what "double-entry bookkeeping" means, and it isn't extra paperwork for its own sake — it's what keeps the accounting equation true after every single event, not just at month-end.

Take a simple case: Riverside Grocery buys $400 of stock and pays cash on the spot.

3 March — buy $400 of stock, paid in cash
Account Debit Credit
Inventory 400
Cash 400

Inventory is an asset, so the debit increases it. Cash is also an asset, so the credit decreases it. Total assets don't change — $400 moved from one asset account to another — and the two sides of the entry match exactly. That balance is what a trial balance checks for later: if total debits across every account in the ledger don't equal total credits, a transaction was recorded incorrectly somewhere.

Now compare a transaction that changes two different sides of the equation. Riverside Grocery sells $250 of goods for cash:

3 March — sell $250 of goods for cash
Account Debit Credit
Cash 250
Sales revenue 250

Cash (an asset) is debited, so it increases. Sales revenue (credit-normal) is credited, so it also increases. Assets go up by $250, and equity goes up by $250 too, through the revenue leg — the equation stays balanced because both sides moved together, not because they canceled out.

A compound entry: more than two accounts, same rule

Real transactions often touch more than two accounts at once. Suppose Riverside Grocery sells $600 of goods: the customer pays $400 cash immediately and puts the rest on account.

4 March — sell $600 of goods, part cash and part on credit
Account Debit Credit
Cash 400
Accounts receivable 200
Sales revenue 600

Three accounts, still one rule: total debits ($400 + $200 = $600) equal total credits ($600). A compound entry just means more lines on one or both sides — the balance requirement never changes. This is the exact shape you'll use constantly once you start writing entries into the general journal.

Applying the rule to a full day of transactions

The account-type table only helps if you can apply it fast, transaction by transaction. Try these four for Dusk Coffee, a small café:

# Transaction Which account? Debit or credit? Why
1 Pay $180 rent in cash Rent expense Debit Expenses increase with a debit
1 Pay $180 rent in cash Cash Credit Asset decreasing
2 Owner deposits $2,000 of personal savings Cash Debit Asset increasing
2 Owner deposits $2,000 of personal savings Owner's capital Credit Equity increasing
3 Borrow $5,000 from the bank Cash Debit Asset increasing
3 Borrow $5,000 from the bank Loan payable Credit Liability increasing
4 Owner withdraws $150 for personal use Drawings Debit Drawings increase with a debit (reduces equity)
4 Owner withdraws $150 for personal use Cash Credit Asset decreasing

Notice how the same account, Cash, gets debited in two rows and credited in two others. There's nothing inconsistent about that — Cash simply moves in the direction its own row calls for on every single transaction. The account doesn't "remember" what happened last time.

Don't judge the entry by whether cash went up

A transaction can be entirely legitimate and still reduce cash — paying rent, buying stock, or repaying a loan all credit Cash. And a transaction that increases cash isn't automatically revenue — borrowing $5,000 increases cash, but it's a liability, not income. Judge each leg by its account type, never by whether it "feels" like a gain or a loss.

Doing this in Reyuko

You don't have to hold this table in your head to use it correctly. In Reyuko, every transaction screen — recording an Invoice, a Purchase Bill, a payment in Cash & Bank — asks you what happened in plain terms (which customer, which product, how much, paid now or later) and posts the matching debit and credit lines into the General Journal for you, using the account mapping you set up once in the Chart of Accounts.

That mapping is what enforces the account-type rule automatically: an account created under Assets in Reyuko behaves as debit-normal everywhere it's used, and one created under Liabilities behaves as credit-normal, without you re-deciding it each time you post an entry. Any double-entry system — Reyuko included — will refuse to post an unbalanced entry, so a lopsided transaction gets caught before it ever reaches your books. This is part of the free edition; no paid plan is required to get proper double-entry posting.

Check yourself before you move on

For each of the following, name the account, and say whether it's a debit or a credit.

  1. You pay a $90 electricity bill in cash.
  2. A customer pays off a $300 invoice from last month.
  3. You buy a $1,200 laptop on 30-day credit terms.
Show answers
  1. Debit Electricity expense $90 (expense increasing); Credit Cash $90 (asset decreasing).
  2. Debit Cash $300 (asset increasing); Credit Accounts receivable $300 (asset decreasing — the receivable is settled, not new revenue).
  3. Debit Equipment $1,200 (asset increasing); Credit Accounts payable $1,200 (liability increasing).

Once these four rows stop needing conscious thought, you're ready for the chart of accounts that tells you exactly which account each transaction belongs to, and the general journal format you'll use to write it all down in order.

Frequently asked questions

Where does a debit go, and what does it change in an account?

They are the two sides of an entry: a debit is the left side and a credit is the right side. Neither word means increase or decrease on its own. The effect depends on the account type, so a debit raises assets and expenses while a credit raises liabilities, equity and revenue. Both sides of every entry carry equal amounts.

What keeps the two sides of a journal entry in balance?

Each transaction affects the business in two places, so every entry needs equal debit and credit amounts. This keeps assets equal to liabilities plus equity after each entry. For example, buying 400 of stock for cash debits Inventory 400 and credits Cash 400, which moves value between two assets while the total stays the same.

Which accounts increase with a credit?

Liability, equity and revenue accounts increase with a credit. These sit on the right side of the accounting equation, so a credit adds to their balance. A debit to any of them reduces the balance. Owner drawings is the one exception inside equity, because it reduces equity and therefore grows with a debit.

How do I record paying a $90 electricity bill in cash?

Debit Utilities expense $90 and credit Cash $90. The expense account increases, so it takes the debit, and cash decreases, so it takes the credit. Both sides carry $90, so the entry balances. The bill is paid in full, so no payable balance is left open after the entry.

Does an account I create in Reyuko follow the debit or credit rule for its type?

Yes. An account created under Assets behaves as debit-normal everywhere it is used, and one created under Liabilities behaves as credit-normal. You set the category once in the Chart of Accounts, and Reyuko applies the rule each time you post to it, so you do not decide the side again.

Do credits increase liabilities?

Yes. A credit increases a liability account, and it also increases equity and revenue accounts, because liabilities sit on the right-hand side of the accounting equation, Assets = Liabilities + Equity. For example, borrowing $5,000 from the bank debits Cash $5,000, which raises an asset, and credits Loan payable $5,000, which raises a liability. Repaying the loan later debits Loan payable and lowers it.

Let the software apply the rule for you

Reyuko posts both sides of every transaction automatically once you pick the accounts — you never have to decide which side is which.

Download Reyuko freeSee what's included