Module 03 · Bookkeeping Terms & Exercises

From Source Document to Trial Balance: The Complete Path

The bookkeeping process from receipt to ledger has five stops, from source document to trial balance. See each step with a $1,800 sales invoice example.

7 min readLesson 8 of 12 in this moduleUpdated 2026-08-25

The accounting cycle steps sound abstract until you follow one piece of paper through all of them. A receipt in your hand goes through exactly five stops before it becomes a number on a financial statement, and every one of those stops has a name, a purpose, and a way to check your work before moving to the next. Skip a stop, or do it out of order, and the error shows up much later — usually as a trial balance that refuses to balance.

Key takeaways

  • Every transaction travels the same five-stop path: source document → chart of accounts match → journal entry → general ledger → trial balance.
  • A source document is proof a transaction happened — a receipt, invoice, bank statement, or payslip. Nothing gets recorded without one.
  • The journal records transactions in date order; the ledger reorganizes the same entries by account so you can see a running balance.
  • A trial balance lists every account's ending balance and checks that total debits equal total credits.
  • Sources disagree on whether the "full" accounting cycle has 8, 9, or 10 steps — this article covers the first five, ending at the trial balance, which is where Module 03's own exercises stop.
  • Balancing is not the same as being correct — a trial balance can balance and still contain real errors.

Step 1: the source document

Nothing gets recorded in bookkeeping without proof that it happened. That proof is the source document — the physical or digital paper trail behind a transaction. Different transactions produce different kinds of source documents, and each one typically points toward a predictable pair of accounts: The lesson on types of source documents covers what makes each one valid and how long to keep it.

Source document Used for Typical accounts affected
Receipt or till slip Cash sale or cash purchase Cash, and Sales Revenue or an expense account
Sales invoice Credit sale to a customer Accounts Receivable, Sales Revenue
Purchase invoice / supplier bill Credit purchase from a vendor Inventory (or an expense), Accounts Payable
Bank statement / transfer confirmation Bank movement, receivable collected, payable settled Bank, and whichever account is being cleared
Payslip Employee wages for the period Wages Expense, Cash or Wages Payable
Petty cash voucher Small day-to-day cash purchases Relevant expense, Cash

If you can't point to a document behind a number in your books, that's a sign the number shouldn't be there yet — or that you're missing paperwork you'll need later. Common bookkeeping mistakes covers what tends to go wrong when this step gets skipped.

Step 2: match it to the chart of accounts

Before you can write anything down, you need to know which accounts the document actually affects. This is where your chart of accounts does its job — a fixed, organized list of every account your business uses, grouped under assets, liabilities, equity, revenue, and expenses.

A sales invoice, for example, always points to the same pair: Accounts Receivable (an asset going up) and Sales Revenue (revenue going up). Once you can reliably match a document type to its accounts, the next step is close to automatic.

Step 3: the journal entry

Now the transaction gets written down — in the General Journal, in the order it happened, as a debit and a credit of equal value.

Northside Hardware sells $1,800 of goods on credit

On 14 July, Northside Hardware issues a sales invoice for $1,800 of goods, payment due in 30 days.

14 July — sales invoice #1042, 30-day terms
Account Debit Credit
Accounts receivable 1,800
Sales revenue 1,800

The journal is a chronological diary — every transaction from every part of the business, in the order it occurred, regardless of which accounts it touches. That makes it a complete record, but not a useful one for answering "what's my cash balance right now?" That question needs the next step.

Step 4: posting to the general ledger

The general ledger takes every journal entry and re-sorts it by account, so each account shows its own running balance. The same $1,800 entry above gets posted twice — once into the Accounts Receivable ledger account, once into the Sales Revenue ledger account.

Accounts receivable ledger, partial view
Date Description Debit Credit Balance
1 Jul Opening balance 3,200
14 Jul Invoice #1042 1,800 5,000
22 Jul Customer payment received 2,400 2,600

This is the difference between a journal and a ledger in one picture: the journal shows you what happened, in order; the ledger shows you where each account stands, right now. Bookkeepers sometimes also keep subsidiary ledgers — a detailed ledger per customer or vendor — that roll up into a single Accounts Receivable or Accounts Payable line in the general ledger.

Step 5: the trial balance

At the end of the period, every account's ending balance from the general ledger gets copied onto one list: the trial balance. Every account appears once, with its balance in either the debit or credit column, and the two columns must add up to the same total.

Simplified trial balance extract, 31 July
Account Debit Credit
Cash 8,500
Accounts receivable 2,600
Accounts payable 3,800
Owner's capital 18,000
Sales revenue 4,300
Operating expenses 15,000

A trial balance serves exactly one purpose: proving that total debits equal total credits before you move on to preparing financial statements. It is a checkpoint, not a certificate of accuracy — which is the single most important thing to understand about it.

Balanced is not the same as correct

A trial balance can balance perfectly and still be wrong. A transaction recorded to the wrong account, a transaction left out entirely, or a transaction recorded twice on both sides will all still leave debits equal to credits. What a trial balance does catch reliably is a one-sided entry — a debit posted with no matching credit, or a transposed figure that throws the totals off. That's exactly the kind of error the transaction classification exercise is designed to help you avoid making in the first place.

The path, start to finish

Source document → Chart of accounts match → Journal entry → General ledger → Trial balance

The document-to-trial-balance path

Every one of the five steps depends on the one before it. A journal entry copied from the wrong document produces a ledger entry in the wrong account, which produces a trial balance that's balanced but meaningless. That's why getting the classification right at step 2 — correctly identifying receivables vs. payables, and correctly separating a cost, an expense, and an asset — matters more than any single step that comes after it.

Why the step count varies between sources

Some textbooks describe an 8-step cycle, others 9 or 10. The difference is almost never about disagreement over what actually happens — it's about whether "post adjusting entries," "prepare an adjusted trial balance," and "close temporary accounts" are counted as separate steps or folded together. The five steps above are the part every source agrees on; what comes after the trial balance — adjustments, financial statements, and closing — is covered once your books are actually balanced.

Where the path continues

The trial balance is a milestone, not a finish line. From here, a full closing period still needs adjusting entries — for things like prepaid and accrued items and depreciation — before the numbers are ready to appear on financial statements. This module stops at a clean trial balance deliberately: it's the concrete, checkable milestone that everything after it depends on, and it's exactly what the companion exercise asks you to build and then debug by hand.

Doing this in Reyuko

This five-step path is exactly how Reyuko is structured under the hood, and none of it requires you to work through the steps manually. Recording an Invoice or a Purchase Bill posts directly into the General Journal, both sides at once — you enter the transaction, not the individual debits and credits. From there it flows automatically to the General Ledger, where every account shows its running balance, and Reyuko's Trial Balance report is generated live from those same ledger balances rather than copied over by hand, so it can never disagree with the ledger behind it. If a document doesn't balance, Reyuko won't let you save it — the same debit-equals-credit check a trial balance performs, applied at the moment you record the transaction instead of afterward.

Test yourself

For each document below, name the two accounts a journal entry would need — before checking the answer.

  1. A bank statement shows a customer's $2,600 invoice payment landing in the account.
  2. A supplier's invoice for $4,100 of inventory arrives, payment due in 45 days.
  3. A payslip shows $3,000 of wages for staff hours worked this month, paid by bank transfer today.
Show answers
  1. Debit Cash/Bank, credit Accounts receivable — this clears an existing receivable, it doesn't create new revenue.
  2. Debit Inventory, credit Accounts payable — an asset and a liability rise together; nothing hits the income statement yet.
  3. Debit Wages expense, credit Cash — benefit and payment land in the same period, so no accrual is needed here.

Frequently asked questions

Which stops does a receipt pass before it reaches the trial balance?

Five steps take a receipt to a trial balance: identify the source document, match its accounts in the chart of accounts, write the journal entry, post it to the general ledger, then copy ending balances into the trial balance. A $1,800 sales invoice, for example, debits Accounts receivable and credits Sales revenue, then posts to both ledger accounts. Adjustments and statements come after this point.

What counts as a source document?

A source document is the proof that a transaction happened, such as a till receipt, sales invoice, supplier bill, bank transfer confirmation, payslip or petty cash voucher. Each type points toward a predictable pair of accounts. A sales invoice points to Accounts receivable and Sales revenue. If you cannot point to a document behind a number, that number should not be in your books yet.

What does posting to the ledger mean?

Posting means copying each journal entry into every ledger account it touches, so each account shows a running balance. The journal lists transactions in date order from the whole business, while the ledger groups them by account. A $1,800 sales invoice is posted once to Accounts receivable and once to Sales revenue, each with its updated balance.

Can a trial balance balance and still be wrong?

Yes. A trial balance only proves that total debits equal total credits. A transaction posted to the wrong account, one left out entirely, or one recorded twice on both sides still leaves the columns equal. A one-sided entry or a transposed figure usually breaks the balance, so the check catches arithmetic slips but not every misposting.

Does posting an invoice create the journal entry for me?

Yes. In Reyuko, an Invoice or Purchase Bill posts directly into the General Journal with both sides at once, so you enter the transaction rather than the individual debits and credits. It then flows to the General Ledger. If a document does not balance, Reyuko will not let you save it.

What is the Trial Balance report in Reyuko built from?

The Trial Balance report in Reyuko sits under Reporting and is generated live from the same ledger balances. It therefore cannot disagree with the General Ledger behind it. Because it reads those balances directly, you never copy figures across by hand.

Let documents flow straight into the ledger

Reyuko posts a sale, bill or payment straight into the General Journal and General Ledger, then generates a live Trial Balance from those same balances.

Download Reyuko freeSee what's included