Module 02 · Basic Bookkeeping Skills

General Ledger vs Subsidiary Ledger: How Your Entries Become Balances

General ledger vs subsidiary ledger: the general ledger keeps one balance per account, a subledger holds the detail behind it, and the two must reconcile.

7 min readLesson 7 of 14 in this moduleUpdated 2026-08-25

You can write a hundred journal entries and still not know how much cash you have, because the journal shows events in the order they happened, not a running total for any one account. Getting an actual balance — for Cash, for Sales, for what one customer owes you — takes a second step: copying each entry into the account it belongs to. That step is called posting, and where it lands is the general ledger and its subsidiary ledgers.

Key takeaways

  • Posting copies each debit and credit line from the general journal into its matching account, keeping the same date and amount.
  • The general ledger holds one running-balance account for every entry in your chart of accounts — Cash, Sales, Accounts Receivable, and so on.
  • A subsidiary ledger (subledger) breaks one general ledger account into per-item detail — one balance per customer, per vendor, or per bank account.
  • The total of a subledger must always equal the balance of its parent account in the general ledger — if it doesn't, an entry was posted late, twice, or to the wrong place.
  • Common subledgers: Accounts Receivable by customer, Accounts Payable by vendor, and separate ledgers for each individual bank account.

General ledger vs subsidiary ledger, in one paragraph

The general ledger holds one summary balance per account in the chart of accounts. A subsidiary ledger (subledger) tracks the detail behind a single general ledger account — such as one balance per customer inside accounts receivable — and its total must always tie back to the general ledger figure.

That relationship — summary on one side, detail on the other, always reconciling to the same number — is the whole idea behind subledgers. Nobody actually manages a business off the general ledger alone, because "Accounts Receivable: $4,300" doesn't tell you who to call about a late payment. And nobody manages it off subledgers alone either, because a lender or an accountant preparing financial statements needs the summary figure, not fifty individual customer balances. You need both, connected.

From journal to ledger: what posting actually does

Picture a single day's entries in the general journal for Riverside Grocery:

12 August — two transactions, before posting
Account Debit Credit
Inventory 600
Cash 600
Cash 850
Sales revenue 850

The journal shows these in the order they happened. Posting takes each individual line and files it into the account it belongs to, in the general ledger — Inventory gets its $600 debit, Cash gets a $600 credit and an $850 debit, Sales revenue gets its $850 credit. Nothing about the amount or the date changes; posting is purely reorganization, sorting the same facts by account instead of by time.

Here's what the Cash account in the general ledger looks like after those two lines are posted, starting from an opening balance of $3,000:

Date Description Debit Credit Balance
— Opening balance 3,000
12 Aug Bought stock, receipt #0231 600 2,400
12 Aug Cash sale 850 3,250

This is what a journal alone can never show you directly: a running balance, updated line by line, for one specific account. That's the entire purpose of the general ledger — every account in your chart of accounts has a page exactly like this one, and together, all of those pages are the general ledger.

Posting never changes an amount

If a journal entry debits Cash for $850, the ledger posting is also $850 — same date, same amount, same direction. Posting is a filing step, not a recalculation. Any difference between what was journaled and what was posted is an error to be found, not a normal variance.

What is a general ledger used for?

The general ledger is the master record of every account in the business — assets, liabilities, equity, revenue, and expenses alike. Each account shows its full activity and running balance, and it's these balances, taken together, that form the trial balance and ultimately the financial statements. When someone asks "what's our cash position" or "how much have we spent on rent this year," the answer comes from the general ledger, not from re-reading every journal entry from scratch.

Where subledgers come in

The general ledger is fast for totals and useless for detail. "Accounts Receivable: $4,300" is a perfectly correct balance — and it tells you nothing about which of your twelve customers owes what. That's the gap a subsidiary ledger closes.

A subledger tracks the individual detail sitting behind one general ledger account. The most common example is Accounts Receivable:

Customer Amount owed
Riverside Grocery 1,200
Dusk Coffee 600
Northside Hardware 2,500
Total (Accounts Receivable subledger) 4,300

That subledger total — $4,300 — has to match the Accounts Receivable balance in the general ledger exactly. If a customer pays you $600 and it only gets recorded in the subledger (updating that one customer's balance) but never posted to the general ledger account, or vice versa, the two numbers drift apart, and neither one can be trusted until the mismatch is found.

The same pattern repeats for other accounts:

Subledger Tracks Reconciles against
Accounts Receivable Balance owed by each customer The AR balance in the general ledger
Accounts Payable Balance owed to each vendor The AP balance in the general ledger
Cash / Bank Movement in one specific bank account The bank statement for that account
Inventory Quantity and cost per individual item The Inventory balance in the general ledger

What is a subledger, with an example

A subledger tracks detail behind one general ledger account. Accounts receivable is the clearest example: the general ledger shows the total owed by all customers combined, while the accounts receivable subledger shows exactly how much each individual customer owes, updated with every invoice and every payment. The same pattern applies to accounts payable by vendor, and to inventory tracked item by item rather than as one lump balance.

Reconciling a subledger to its control account

Dusk Coffee's general ledger shows Accounts Payable at $1,800. The vendor subledger shows: Supplier A $1,100, Supplier B $700 — total $1,800. They match, so both records can be trusted. If the subledger had instead totaled $1,750, that $50 gap would need tracing to a specific unposted or duplicated bill before either figure is safe to report.

Why keep both — isn't the ledger enough?

The general ledger gives you the summary figures a set of financial statements actually needs — one Accounts Receivable line on the balance sheet, not twelve customer lines. Subledgers give you what you need to run the business day to day: which customer to follow up with, which vendor bill is due next. Keeping both, in agreement with each other, means you always have the number an outsider (a lender, an accountant) needs and the number you need internally, without maintaining two conflicting sets of records.

A mismatch usually means a posting problem, not a math problem

If a subledger total doesn't match its general ledger account, the near-universal cause is a posting timing issue: an entry recorded in one but not yet in the other, or recorded twice in one of them. Chasing the mismatch by re-adding the numbers rarely finds it — check for a journal line that was never posted, or was posted twice, first.

Doing this in Reyuko

Reyuko builds this connection in rather than leaving it to you to reconcile by hand. The General Ledger shows the running balance of any account the moment a transaction posts — you open the account and see its full history and current balance, generated from the same postings as everything else.

For Accounts Receivable and Accounts Payable specifically, Reyuko's Payment module shows open balances per contact with aging, so the "who owes what" detail a subledger normally provides is available directly against each customer or vendor record, rather than as a separate spreadsheet you maintain and reconcile yourself. Because both the summary account and the per-contact detail come from the same underlying entries, there's no separate reconciliation step where the two could quietly drift apart. This is part of Reyuko's free edition.

Quick check: does it reconcile?

A business's general ledger shows Accounts Payable at $3,400. Its vendor subledger shows: Vendor A $1,900, Vendor B $900, Vendor C $500.

Show the answer

$1,900 + $900 + $500 = $3,300. That's $100 short of the $3,400 general ledger balance — a mismatch. The next step is to check for a vendor bill that was posted to the general ledger's Accounts Payable account but never recorded against a specific vendor in the subledger (or the reverse), starting with the most recent unposted or manually adjusted entries.

Once posting from journal to ledger feels routine, the next useful skill is applying the exact same process to a real day's transactions end to end — see the worked example of posting to the cash ledger for a full walkthrough with a running balance.

Frequently asked questions

What is the difference between a general ledger and a subsidiary ledger?

The general ledger holds one summary balance for each account in the chart of accounts, such as total Accounts Receivable. A subsidiary ledger, or subledger, breaks one of those balances into detail, such as a separate balance for each customer. The general ledger supplies the summary figures a set of financial statements needs, while subledgers show who owes what and which bill is due next.

Does the subledger total have to equal the general ledger balance?

Yes. The total of a subledger must equal the balance of its parent account in the general ledger. For example, if Accounts Payable in the general ledger is $1,800 and the vendor subledger shows Supplier A at $1,100 and Supplier B at $700, the two tie out. If the subledger instead totaled $1,750, the $50 gap would need tracing to a specific unposted or duplicated bill first.

Why might a subledger and the general ledger not match?

The usual cause is a posting problem, not a math problem: an entry was recorded in one record but not the other, or recorded twice in one of them. Before re-adding the numbers, check for a journal line that was never posted or was posted twice. For example, an Accounts Payable balance of $3,400 against vendor balances totaling $3,300 leaves a $100 gap to trace.

Does Reyuko post to the ledger automatically?

Yes. Reyuko posts each journal line to its ledger account automatically, and the General Ledger shows the running balance of any account the moment a transaction posts. You open the account to see its full history and current balance, with no manual transfer step between the journal and the ledger.

Is there a subledger for customers and suppliers in Reyuko?

Yes, in effect. Reyuko's Payment module shows open balances per contact with aging, so the who-owes-what detail sits against each customer or vendor record without a separate spreadsheet. The summary account and the per-contact detail come from the same entries, so there is no separate reconciliation step for them to drift apart.

See every account balance update itself

Reyuko posts each journal line to its ledger account automatically, so the running balance you see is always current — no manual transfer step.

Download Reyuko freeSee what's included