Module 03 · Bookkeeping Terms & Exercises

Exercise: Build a Trial Balance from Journal Entries (With Answer Key)

A trial balance difference divisible by 9 often means two digits were swapped. Learn the divide-by-2 and divide-by-9 checks to find the wrong figure fast.

6 min readLesson 9 of 12 in this moduleUpdated 2026-08-25

Northside Hardware closed its books for July with total debits of $40,100 and total credits of $48,500. Eight accounts, one $8,400 gap, and — somewhere in the six journal entries below — the single line that's sitting in the wrong column. Post the entries yourself, build the trial balance, and find the error before you check the answer key.

To build a trial balance, post every journal entry to its ledger account, total each account's ending balance, then list debit-balance accounts in one column and credit-balance accounts in another. If both column totals match, the trial balance balances — though matching totals alone don't prove every entry is correct.

Key takeaways

  • A trial balance is just every ledger account's ending balance, sorted into a debit column or a credit column, with both columns totaled.
  • If the columns don't match, at least one entry was posted to the wrong side, the wrong account, or not at all — the difference itself is often a clue.
  • A difference that divides evenly by 2 usually means one correct figure landed in the wrong column; a difference divisible by 9 usually means two digits were swapped (a transposition).
  • Posting six simple journal entries correctly, then finding a deliberate error in the resulting trial balance, is the fastest way to build real confidence with this step.
  • A trial balance that balances is not proof the books are correct — it only proves debits equal credits, not that they're in the right accounts.

The scenario: six entries, eight accounts, one month

Northside Hardware opened its July books with nothing on them. Over the month, its bookkeeper recorded six transactions. Post each one to its ledger account as you go — by the end you'll have everything you need to build July's trial balance.

1 July — owner invests cash to start the month
Account Debit Credit
Cash 18,000
Owner's capital 18,000
3 July — buy store shelving and equipment, paid in cash
Account Debit Credit
Store equipment 6,000
Cash 6,000
5 July — buy inventory from a supplier, on 30-day credit
Account Debit Credit
Merchandise inventory 12,300
Accounts payable 12,300
10 July — pay part of that supplier bill in cash
Account Debit Credit
Accounts payable 8,500
Cash 8,500
Throughout July — summary of the month's sales
Account Debit Credit
Cash 18,300
Accounts receivable 4,200
Sales revenue 22,500
31 July — pay July's operating expenses (rent, wages, electricity)
Account Debit Credit
Operating expenses 13,300
Cash 13,300

That last entry is a monthly summary, not a single transaction — in practice, rent, wages and utilities are usually recorded as separate line items as each bill arrives, but they're combined here so the exercise stays to six entries. Notice, too, that none of these entries records a cost of goods sold. Northside's $12,300 of inventory stays on the books as an asset until it's actually sold and the cost is matched against the sale — a step Module 04 covers in full once you've got the trial balance habit down.

Step 1: Post everything to the ledger

Posting means sorting these six entries by account and running a balance for each one. Cash is the busiest account, so it's worth watching in full:

Date Entry Debit Credit Running balance
1 Jul Owner invests capital 18,000 18,000
3 Jul Buy equipment 6,000 12,000
10 Jul Pay supplier 8,500 3,500
— Month's cash sales 18,300 21,800
31 Jul Pay operating expenses 13,300 8,500

Cash ends July at $8,500 — a general ledger is exactly this: a running balance per account, built up one posted entry at a time, rather than one long list of transactions in date order. Accounts payable moves the same way — $12,300 credit from the inventory purchase, then $8,500 debit from the partial payment, leaves a $3,800 credit balance still owed to the supplier. Work through the remaining four accounts the same way; each one only has one or two entries touching it, so the ending balance is easy to confirm.

Step 2: Draw up the trial balance

Once every account has an ending balance, sort them by their normal side — assets and expenses increase with a debit, liabilities, equity and revenue increase with a credit — and total both columns. Here's what actually landed on Northside's July trial balance:

Account Debit Credit
Cash 8,500
Accounts receivable 4,200
Merchandise inventory 12,300
Store equipment 6,000
Accounts payable 3,800
Owner's capital 18,000
Sales revenue 22,500
Operating expenses 13,300
Total 40,100 48,500

Debits and credits should always match. These don't — by exactly $8,400.

Find the error before you check the key

Two quick tests, straight from Northside's own bookkeeping routine, narrow down what kind of mistake you're looking for:

  • Divide the difference by 2. If it comes out even, there's a strong chance one account's balance is correct in size but was written into the wrong column entirely — the test recovers exactly that account's value.
  • Divide the difference by 9. If that comes out even instead, look for a transposed digit — a figure like $1,200 written as $2,100 — since swapping two digits always changes a number by a multiple of 9.

$8,400 ÷ 2 = $4,200. That's not a coincidence — it's exactly the size of one account above. Which one, and why does dividing by 2 recover it exactly?

Show the answer key

The error: Accounts receivable, $4,200, was listed under Credit instead of Debit. Accounts receivable is an asset — money customers still owe Northside for the July sales already recorded — so it belongs on the debit side, the same side as Cash, Inventory and Equipment.

Why the gap is exactly double the error: when a $4,200 debit balance is written into the credit column by mistake, the debit total loses $4,200 it should have had, and the credit total gains $4,200 it shouldn't have — a swing of $8,400 between the two columns for a single misplaced figure. That's the general pattern: a one-column posting error always creates a difference equal to twice the misplaced amount, which is exactly why the divide-by-2 test works.

The corrected trial balance:

Account Debit Credit
Cash 8,500
Accounts receivable 4,200
Merchandise inventory 12,300
Store equipment 6,000
Accounts payable 3,800
Owner's capital 18,000
Sales revenue 22,500
Operating expenses 13,300
Total 44,300 44,300

Both columns now total $44,300. The trial balance balances.

A balanced trial balance still isn't a verified one

Getting to $44,300 = $44,300 only proves the two columns agree — it doesn't prove every entry was posted to the right account. A transaction recorded nowhere at all, or booked correctly to the wrong account (say, this month's supplier payment posted against Cash but never cleared from Accounts payable), can still leave both totals matching. Balancing is the first check you run, not the last one.

Why this step matters more than it looks

A trial balance with a $8,400 gap is annoying but obvious — nobody mistakes $40,100 for $48,500. The dangerous version is the one that balances anyway, because a wrong-account error and an omitted transaction both leave the totals untouched. That's the real reason this step exists in the path from source document to trial balance: it's a mechanical check that catches one specific class of mistake — an unbalanced posting — cheaply, before the same numbers get carried into an income statement or balance sheet where the error is much harder to spot.

If the classification side of this — deciding which account a transaction touches in the first place — still feels shaky, the transaction-classifying exercise is worth doing first. Everything above assumes you already know Accounts receivable is an asset; that exercise is where you'd build that fluency.

Doing this in Reyuko

Reyuko's Trial Balance report, under Reporting, does the sorting and totaling shown above automatically: it pulls every account's ending balance straight from the General Ledger, places each one on its normal debit or credit side, and shows a Σdebit = Σkredit footer with a balanced/unbalanced indicator. Because every entry is posted through the General Journal — which won't save a transaction where debits and credits don't match in the first place — the kind of single-sided posting error in this exercise can't happen inside Reyuko the way it happened on Northside's paper ledger. The report is part of Reyuko's free edition, alongside the General Journal and General Ledger it draws from.

Frequently asked questions

How do I build a trial balance from journal entries?

Post every journal entry to its ledger account, then total each account's ending balance. List accounts with debit balances in one column and accounts with credit balances in another, and total both columns. If the totals match, the trial balance balances. Matching totals only confirm the arithmetic, not that each entry landed in the right account, so treat balancing as the first check.

What does a trial balance difference divisible by 9 usually point to?

It usually points to a transposition, where two digits in one figure are swapped. Swapping two digits always changes a number by a multiple of 9, so a gap that divides evenly by 9 is a useful lead. Example: a $1,200 figure entered as $2,100 is off by $900, which divides evenly by 9. This is a rule of thumb, so confirm the entry before correcting it.

How do I find the one figure in the wrong column?

Divide the difference by 2. If the result matches the balance of one account, that account was probably written into the opposite column. Check its normal side: an asset such as accounts receivable belongs in the debit column, while a liability or revenue account belongs in credit. Move the figure to the correct column, then total both columns again to confirm they match.

Why does an even difference point to one correct figure in the wrong column?

A figure on the wrong side drops out of the side where it belongs and also adds to the side where it does not, so the gap is double its size. Example: a $4,200 debit balance listed under credit leaves debits $4,200 short and credits $4,200 over, a gap of $8,400. Dividing $8,400 by 2 returns $4,200, which points straight to that account.

Which errors leave the trial balance balanced?

Errors where an entry goes to the wrong account, or is left out on both sides, can leave both column totals equal. For example, a $1,000 equipment repair debited to Equipment instead of Repairs expense keeps debits equal to credits. Only checking each account balance against its source document catches these, so a balanced trial balance is a starting point.

Let software catch the column error for you

Reyuko's Trial Balance report is generated live from your General Ledger, with a built-in balanced/unbalanced indicator, so a misplaced figure shows up the moment you look.

Download Reyuko freeSee what's included