Module 06 · Everyday Bookkeeping Examples

How to Record Any Transaction: A Four-Step Framework

How to record a business transaction in four steps: find the source document, name the accounts, apply debit and credit rules, then post a balanced entry.

6 min readLesson 1 of 13 in this moduleUpdated 2026-08-25

You know the rule: debits and credits must balance. What you don't always know, staring at a bank transfer for $450 with no invoice attached, is which accounts to touch. That gap — between knowing the rule and applying it to a messy real transaction — is where most everyday bookkeeping mistakes happen. There's a fixed four-step process that closes it, and it works on every transaction you'll ever see.

Key takeaways

  • How to record a business transaction always follows four steps: find the source document, identify the accounts affected, apply debit/credit rules by account type, then write and post the journal entry.
  • The first step — locating the source document — is the one people skip, and it's the one that causes the most downstream errors.
  • Asking "what increased, what decreased" is faster than memorizing which account is normally a debit or a credit.
  • A journal entry isn't finished until it balances: total debits must equal total credits, every time, no exceptions.
  • The framework doesn't change with the tool. Paper ledger, spreadsheet or software — the four steps are identical.

The four-step framework

Step 1: Identify the source document

Every entry starts with evidence, not memory. A receipt, an invoice, a bank statement line, a signed loan agreement — something that proves the transaction happened, for how much, and on what date. If you can't point to a document, you don't yet have enough information to record anything. This isn't bureaucracy for its own sake: it's what lets you, or anyone auditing the books later, verify a number instead of taking your word for it. See the full map of which document supports which transaction for specifics.

Step 2: Decide which accounts are affected

Every transaction changes at least two accounts. Ask two plain questions: what did the business receive, and what did it give up (or now owe)? A cash sale gives the business cash and gives up nothing physical — but it gains revenue. A loan gives the business cash and creates a debt. A supplier bill gives the business inventory and creates a debt. Naming the two accounts is 80% of the work; the last 20% is just sequencing debit and credit correctly.

Step 3: Apply debit and credit rules by account type

This is where the debit and credit rules do the actual work — but only if step 2 was done correctly first. Debits increase assets and expenses and decrease everything else; credits do the reverse, increasing liabilities, equity and revenue while decreasing assets and expenses. Neither side is "good" or "bad"; they're simply opposite directions for opposite account types.

Account type Increases with Decreases with
Assets (cash, inventory, equipment) Debit Credit
Expenses Debit Credit
Liabilities (loans, payables) Credit Debit
Equity (owner's capital) Credit Debit
Revenue Credit Debit

Record any transaction in four steps: find the source document, identify the accounts it touches, apply debit/credit rules by account type, then write the balanced journal entry and post it to the ledger.

Step 4: Write and post the journal entry

Write the date, list the account(s) debited first, then the account(s) credited, with amounts against each. Total debits must equal total credits — if they don't, you've made an error somewhere in step 2 or 3, not a new kind of transaction that breaks the rules. Once it balances, post it to the general ledger so the running balance of each account stays current.

Worked example: a transaction that isn't in the textbook

Riverside Grocery receives a $450 bank transfer from a regular customer with no invoice attached — just a note: "for the holiday hamper order." Nothing has been delivered yet.

  • Step 1 — source document: the bank statement line, plus the customer's note about what it's for.
  • Step 2 — accounts affected: Cash (or Bank) went up. But sales haven't happened — the business now owes the customer $450 of goods, or a refund, if the order falls through. That's a liability, not revenue.
  • Step 3 — debit/credit: Cash is an asset, so the increase is a debit. The liability — call it Customer Deposits — increases with a credit.
  • Step 4 — journal entry:
14 June — $450 deposit received for a holiday hamper order
Account Debit Credit
Cash 450
Customer deposits 450

No revenue account appears anywhere in this entry. That's deliberate — the sale hasn't happened yet, and recording it as revenue now would overstate this month's income and understate next month's, when the hampers are actually delivered. This exact case — and why a deposit is never revenue — gets a full worked-through explanation in how to record sales, deposits and receivables.

Why "what increased, what decreased" beats memorizing the chart

New bookkeepers often try to memorize "cash is always a debit" as a fixed fact. It isn't — cash is a debit when it increases, and a credit when it decreases (a cash payment out, for instance). The reliable habit is asking the direction question first, for both sides of the transaction, then applying the table above. Once you can do that on a transaction you've never seen before, you've actually learned double-entry — not just memorized eight examples.

A purchase on credit, walked through the four steps

Northside Hardware buys $2,400 of stock from a supplier, to be paid in 30 days. 1. Source document: the supplier's invoice. 2. Accounts affected: Inventory (an asset) goes up; the business now owes the supplier (a liability) — Accounts Payable. 3. Debit/credit: Inventory increases with a debit; Accounts Payable increases with a credit. 4. Entry: Debit Inventory $2,400, Credit Accounts Payable $2,400. Balanced.

Common mistakes that break the framework

The framework fails in practice for a handful of predictable reasons, all traceable to skipping one of the four steps:

  • Skipping step 1 and recording from memory a day later, guessing at the amount or date.
  • Skipping step 2 and jumping straight to "cash went up, so credit revenue" without asking whether the money was actually earned yet, versus a deposit, a loan, or a customer paying down an existing invoice.
  • Reversing step 3 — crediting an asset that increased, or debiting a liability that increased — usually from rushing rather than misunderstanding the rule.
  • Skipping step 4's balance check and posting a one-sided entry, which a trial balance will eventually catch, but only after the error has already distorted every report run in between.
A one-sided entry is not a smaller error — it's a broken equation

Recording only the debit or only the credit half of a transaction doesn't just misstate one account; it breaks the accounting equation for every account touched afterward, because nothing ever brings the books back into balance until the missing side is found.

Doing this in Reyuko

Reyuko applies this same four-step logic automatically for anything that runs through Sales, Purchase or Payment — you record the transaction (an invoice, a bill, a payment), and Reyuko posts both the debit and credit side into the General Journal itself, based on the account mapping you set up once in Settings.

For anything outside those modules — an owner's capital injection, a bank loan received, a one-off adjustment — you still work through the same four steps yourself and enter the result directly in the General Journal, where the General Ledger shows the running balance immediately afterward. If you'd rather not think in ledger terms at all when starting out, Reyuko's Basic mode presents simple cash-in and cash-out screens while still posting correct double entry underneath. Both the ledger and the journal are available in Reyuko's free edition.

Test yourself: run the framework on a new transaction

Riverside Grocery's owner uses $10,000 of personal savings to buy a delivery van for the business. Work through all four steps before checking the answer.

Show answer
  1. Source document: the vehicle purchase invoice or bill of sale, showing $10,000 paid.
  2. Accounts affected: the business gains an asset (Vehicles/Equipment); the owner's personal cash isn't a business account, so this is treated as the owner contributing capital to the business, which then buys the van — Owner's Capital (equity) increases.
  3. Debit/credit: Vehicles (asset) increases — debit. Owner's Capital (equity) increases — credit.
  4. Entry: Debit Vehicles $10,000, Credit Owner's Capital $10,000. Balanced.

Frequently asked questions

What are the four steps for recording a business transaction?

Find the source document, such as a receipt, invoice or bank statement line. Identify which accounts the transaction touches. Apply the debit and credit rules by account type, then write the journal entry and post it. Each step depends on the one before it, so skipping the first is the usual reason entries go wrong later.

What do I do with a bank transfer that has no invoice attached?

Start with the bank statement line and any note from the customer, since those are your source document. Then ask what the transfer gave the business and what it creates. If nothing has been delivered yet, the money is a customer deposit, a liability rather than revenue. Example: a 380 transfer for a holiday order is a debit to Cash and a credit to Customer Deposits.

How do I choose the account for an expense I have not seen before?

Ask what the money bought. If the benefit is used up this period, it is an expense; if it still gives benefit later, such as equipment or prepaid insurance, it is an asset. A $90 electricity bill goes to a utilities expense account, while a $1,200 laptop is an asset.

What is the first step when a transaction has no paperwork?

Write one plain sentence saying who paid whom, for what, and when. Then ask what the business received and what it gave up or now owes. If no document turns up, flag the entry as unclear rather than guessing, and ask the customer or supplier for an invoice or receipt.

Do I need to memorize which accounts are debits or credits?

No. Work out whether each account increased or decreased, then apply the rule for its type. Assets and expenses increase with a debit, while liabilities, equity and revenue increase with a credit. Cash is a debit when it goes up and a credit when it goes down. Asking the direction question works on transactions you have never seen before.

Do the steps change if Reyuko posts the entries for me?

The four steps stay the same. Reyuko posts both sides automatically for anything entered through Sales, Purchase or Payment, based on the account mapping you set once in Settings. Entries outside those modules, such as an owner's capital injection, still go into the General Journal, and Basic mode offers simple cash-in and cash-out screens.

Let the software apply the framework

Reyuko posts both sides of every sale, purchase and payment into the General Journal automatically — you enter the transaction, not the debits and credits.

Download Reyuko freeSee what's included